UV Resin Starter Kit

Everything needed to make three UV resin pendants is included in this cute little kit.  Light and resin can be used to create any resin coasted item.

Included:
1 bottle 25ml clear UV resin
3 metal open-backed bezels
3 pieces resin tape
Assorted dried natural flowers
1 UV resin flashlight (1 AAA battery required)

Instructions:
1. Peel backing from bezel tape and firmly seal the back of the bezel with the tape. On a protected work surface pour enough UV resin to coat the bottom of the bezel and cure for 60 seconds with UV light.
2. Carefully arrange flowers as desired in the metal bezel and pour additional UV resin over the flowers.
3. Cure with the UV flashlight for 1-5 minutes, or until no longer tacky. Gently peel away bezel tape.
CAUTION when handling, cured resin might be HOT!

Caution: Keep out of reach of children. Use resin in a well ventilated area. Avoid contact with skin. May be harmful if swallowed. May cause eye irritation. Not edible. Store in a cool, dry place.

Conforms to ASTM D4236

Warning: Not intended for children age 12 and under.

* If you are in a higher humidity environment, resin may take longer to sure.  If resin is tacky, it can be further cured with additional UV light from flashlight, nail salon light, or natural UV from direct sunlight. Place in the sun to naturally cure!